Whirlpool ACM927 WH Mode d'emploi télécharger pdf (Page 90)

Installation

Important

: The covering of the cabinets must be in heat resistant (min. 90°C) material.

If the appliance is installed next to kitchen cabinets, ensure the minimum clearances indicated in the

following figure.

There are certain points to pay attention to when positioning the cooker. Make sure to take into

consideration the following recommendations, in order to prevent any problems and hazardous

situations that may occur!

The cooker can be positioned near other cabinets provided their height does not exceed the hob level.

In selecting a position for the cooker, make sure the appliance is not placed next to a refrigerator and

that there are no flammable or combustible materials in the vicinity, such as curtains, etc. which can

quickly catch fire.

A minimum space of 20 mm between the metal rear cover of the cooker and the wall is required to

ensure air circulation.

If the counter tops are higher than hob level, they should be at least 110 mm from the sides of the cooker.

To fit them, tilt the appliance and screw the 4 feet in the special threads located in the corners

(see Fig. 2).

Fig. 2

Max.

adjustment

15 mm

Fig. 1

Min. 65 cm

Min. 50 cm (depending on the model)

CAUTION: The use of a gas cooking appliance results in the production of heat, moisture and products of

combustion in the room in which it is installed. Ensure that the kitchen is well ventilated especially when the

appliance is in use, keep natural ventilation holes open or install a mechanical ventilation

device(mechanical extractor hood).

CAUTION: This appliance is for cooking purposes only. It must not be used for other purposes, for example

room heating.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 111 112

Pas de commentaire

Whirlpool ACM927 WH Mode d'emploi Page 90