Whirlpool ACM 9417/1 IX Mode d'emploi télécharger pdf (Page 27)





ADJUSTMENTS

• Always disconnect the appliance from

the electricity supply before making any

adjustment.

• All seal must be replaced by the

technician following any adjustment or

regulation.

• The adjustment of the reduce rate

(simmer) must be undertaken only with

burners functioning on natural gas

while in the case of burners functioning

on L.P.G, the screw must be locked down

fully (in clockwise direction).

• “Primary air adjustment” on hob gas

burners is unnecessary.

TAPS

All gas taps are male cone type with only one

way of passage. Adjustment of the “Reduced

rate” position as follows:

• Turn the burner on and place the knob on

the “Reduced rate” position (small ame).

• Remove the knob (A) of the tap which is attached

by simply applying pressure to the rod.





• When the taps is equipped with ame failure

device, the adjustment screw (V) is over (g.

15) or on the side of the stem (g.16).

• Check that the ame does not go out when

the knob is sharply switched from the “Full

on” to “Reduced rate” positions.

CONVERSIONS

REPLACING THE INJECTORS

Our burners can be adapted to dierent types

of gas by simply installing the injectors suitable

for the gas you want to use. To help the installer,

the table (TECHNICAL FEATURES paragraph)

gives the burner nominal heat input, injector

diameter and operating pressure of the

dierent gas types.

Comply with the following instructions:

Injector replacement - Hob burners.

To change the injectors on the hob, remove the

burner cup and head and with a 7 mm Ø socket

spanner replace them (g. 17).

After having replaced the injectors, it

will be necessary to proceed with burner

adjustment as explained in the previous

paragraphs. The technician must replace

any seals after the adjustments have been

made.

MAINTENANCE

Prior to any maintenance work or changing

parts, disconnect the appliance from the

gas and electricity power sources.

CHANGING THE FLEXIBLE GAS HOSE

In order to guarantee that the gas hose is always

in excellent condition we strongly recommend

changing it on the date you will nd printed on

it.

INSTRUCTIONS FOR THE INSTALLER

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Whirlpool ACM 9417/1 IX Mode d'emploi Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers Whirlpool ACM 9417/1 IX