Whirlpool ACM 9417/1 IX Mode d'emploi télécharger pdf (Page 10)

10

ELECTRONIC PROGRAMMER «TOUCH» (D)

Setting the time.

After connecting to mains or after a power

cut, symbol “A” and “0,00” will both ash

simultaneously on the display.

Keep pressed for some seconds simultaneously

+ and - buttons or just MODE button, till when

symbol “A” turn o and symbol

turn on.

Time can be set just when the dot beneath the

symbol

ashes.

Time cannot be adjusted during cooking

program run.

If time is selected while a automatic cooking

program is running, this is deleted.

Program selection

Keep pressed for some seconds MODE

button and pressing it in turns, the following

programs are selected:

1. Minute Minder

The time turns o, the symbol

turns on

and with + and - buttons is possible to select

the time alarm. At the end of the set time, the

buzzer will start and the symbol

ashes. To

turn o the buzzer and turn o the symbol

keep pressed for some seconds MODE button.

The minute minder program runs

independently of other cooking programs.

2. Semiautomatic Program with Duration

or End Time

Select with + and - buttons the duration. The

time of the day turns o, symbol “A” and “dur”

ash. At the end of the set time, the buzzer will

start and the symbol “A” ashes. To turn o the

buzzer press MODE button.

Now the oven is o. Keep pressed for some

seconds simultaneously + and - buttons or just

MODE button and the symbol

is illuminated.

3. Fully automatic program with Duration

and End time

Select with + and - buttons the duration and

the end time. The time of the day turns o,

symbol “A” and “End” ash. Symbol

turns o

and the symbol “A” turns on. The symbol

is

illuminated again when the cooking starts. At

the end of the set time, the buzzer will start, the

symbol

turns o and the symbol “A” ashes.

To turn o the buzzer press MODE button.

Now the oven is o. To set the programmer

on manual operation keep pressed for some

seconds simultaneously + and - buttons or just

MODE button and the symbol

is illuminated.

Changing/Clearing programs

Each program can be cleared keeping pressed

for some seconds simultaneously + and -

buttons. Symbol “A” turns o.

Each program can be changed keeping

pressed for some seconds MODE button and

then pressing it in turns to the function to be

changed. The adjustment can be done with +

and - buttons.

It is possible to check the progress of the

programme by keeping pressed for some

seconds MODE button and then pressing in

turns to the function to be checked.

D

DESCRIPTION OF THE APPLIANCE

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Commentaires sur ces manuels

Pas de commentaire