Whirlpool WDP370PAHB Manuel d'installation télécharger pdf (Page 6)

Using the Faucet

You can draw water from the faucet while the dishwasher

is connected.

NOTE: Do not draw water while the dishwasher is ﬁlling or

while water is being pumped out. (This helps avoid a low ﬁll

when dishwasher is ﬁlling or keeping drain water from mixing

with fresh water when dishwasher is draining.)

10. Adjust water temperature

Press the red button on the hose connector to draw water from

the faucet. (The faucet is set on hot. Adjust the faucet for the

water temperature you want.)

NOTE: Turn the hot water back on after you draw water from

the faucet. Turn off the cold water.

DISCONNECT DISHWASHER

Turn off the hot water. (This can be done after the last rinse.)

11. Disconnect hose from faucet

Press the red button on the connector to release the water

pressure. Lift slightly on the hose connector while pulling down

the locking collar. Pull down on the connector.

Empty any remaining water from the connector by turning the

connector upside down.

12. Disconnect dishwasher

Unplug the power supply cord and return it to the storage

compartment. Return the hoses to the storage compartment.

Vacation or Extended Time without Use

To Reduce Risk of Property Damage During Vacation or

Extended Time Without Use

■ When you will not be using the dishwasher during the summer

months, turn off the water and power supply to the dishwasher

■ Make sure the water supply lines are protected against

freezing conditions. Ice formations in the supply lines

can increase water pressure and cause damage to your

dishwasher or home. Damage from freezing is not covered

by the warranty.

■ When storing your dishwasher in the winter, avoid water

damage by having your dishwasher winterized by authorized

service personnel.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Pas de commentaire

Whirlpool WDP370PAHB Manuel d'installation Page 6