Whirlpool ACM 406/1 Mode d'emploi télécharger pdf (Page 23)

USER’S INSTRUCTIONS





REPLACING THE OVEN LAMP

Ensure the appliance is switched o before

replacing the lamp to avoid the possibility

of electric shock.

In the event one oven lamp need replacing,

the new lamps must comply with the following

requisites:

15 W - 230 V~ - 50 Hz - E 14 - and must be

resistant to high temperature (300°C).

• Lamp holder (g. 8):

Turn glass protection cap (C) counterclockwise

and change the lamp. Re-t the cap, screwing

it back in a clockwise direction.

OVEN DOOR REMOVAL

The oven door can be removed to give easier

access to the oven when cleaning.

To remove, proceed as follows:

• Open the oven door and insert rivet or nail

(R) in the hole (F) of the hinge (g. 9). The

rivet is not supplied.

• Partially close the door, forcing it upwards at

the same time to free stop tooth and hinge

sector.

• Once the hinge is free, pull the door forwards

tilting it slightly upwards to free sector.

• To reassemble proceed in the reverse order,

paying attention to the correct position of

sectors.





1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

Pas de commentaire

Whirlpool ACM 406/1 Mode d'emploi Page 23