Whirlpool TEP 649 L Mode d'emploi télécharger pdf (Page 24)

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity

supply before carrying out any work on it.

Cleaning the appliance

 Do not use abrasive or corrosive detergents (for

example, products in spray cans for cleaning

barbecues and ovens), stain removers, anti-rust

products, powder detergents or sponges with

abrasive surfaces: these may scratch the surface

beyond repair.

 Never use steam cleaners or pressure cleaners on

the appliance.

 It is usually sufficient simply to wash the hob

using a damp sponge and dry it with absorbent

kitchen towel.

 If the hob is particularly dirty, rub it with a special

glass ceramic cleaning product, then rinse well

and dry thoroughly.

 To remove more stubborn dirt, use the scraper

provided. Remove spills as soon as possible,

without waiting for the appliance to cool, to

prevent residues from forming crusty deposits.

You can achieve excellent results by using a rust-

proof steel wire sponge - specifically designed for

glass ceramic surfaces - soaked in soapy water.

 The scraper provided is sharp: be careful when

using it.

 If plastic or sugary substances are accidentally

melted on the hob, remove them immediately with

the scraper, while the surface is still hot.

 Once it is clean, the hob may be treated with a

special protective maintenance product: the

invisible film left by this product protects the

surface from drips during cooking. This

maintenance task should be carried out while the

appliance is warm (not hot) or cold.

 Always remember to rinse the appliance well with

clean water and dry it thoroughly: residues can

become encrusted during subsequent cooking

processes.

 For hobs which light automatically, the terminal

part of the electronic instant lighting devices

should be cleaned frequently and the gas outlet

holes should be checked for blockages.

Stainless steel frame

(only for models with outer frame)

Stainless steel can be marked by hard water which

has been left on the surface for a long time, or by

cleaning products containing phosphorus. After

cleaning, it is advisable to rinse the surface well and

dry it thoroughly. If water is spilt on the surface, dry

it quickly and thoroughly.

Disassembling the hob

If it is necessary to disassemble the hob:

1. Loosen the screws fixing the alignment springs on

each side.

2. Loosen the screws holding the fixing hooks in

each corner.

3. Take the hob out of its installation cavity.

 Do not attempt to repair the appliance yourself.

If the appliance breaks down, contact a Service

Centre.

Gas valve maintenance

Over time, the valves may become jammed or

difficult to turn. If this occurs, the valve must be

replaced.

 This procedure must be performed by a

qualified technician who has been authorised by

the manufacturer.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Whirlpool TEP 649 L Mode d'emploi Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Whirlpool TEP 649 L