Whirlpool HOB 461 S Mode d'emploi télécharger pdf (Page 12)

GAS BURNERS

The flow of gas to the burners is adjusted by the

knobs which control the safety-closing taps.

Match the mark on the knob with the symbols

printed on the panel:

- full disc = tap closed

- symbol = max. opening or max. flow

- symbol = min. opening or min. flow

To light one of the burners:

1. Press and turn the corresponding knob to the

maximum flow position (large flame) and

keep the knob pressed until the gas is lit.

If there is a power cut use a flame.

2. Set the gas tap to the position required.

If particular characteristics of the locally supplied

gas make lighting the burner with the knob in the

maximum flow position difficult, repeat the

operation with the knob in the minimum flow

position.

The maximum flow is used to bring liquids to the

boil quickly, while the low flow is used to heat

food slowly or for simmering.

All the operating positions must be chosen

between the maximum and the minimum and

never between the maximum and the OFF.

GAS HOB

82569_GB.fm Page 80 Wednesday, March 21, 2001 5:18 PM

Black process 45,0° 133,0 LPI

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Pas de commentaire

Whirlpool HOB 461 S Mode d'emploi Page 12