Whirlpool AKM 702/NB/02 Mode d'emploi télécharger pdf (Page 8)

INSTALLING THE HOB

(NOTES FOR THE INSTALLER)

•

GENERAL NOTES

This appliance conforms to EEC Directive 308/87 concerning

radio interference suppression,

complies with the class “Y”

fire protection category and can be installed next to a tall

cupboard.

These appliances contain components that are allowed to come

into contact with foodstuffs.

These components conform to the EEC standard 89/109/CEE

and thus are not hazardous.

The ceramic hob can be fitted into a worktop of between

30 mm and 50 mm thickness.

A -

For a worktop made of wood use the supplied spring clips

and screws in the accessory pack.

•

Mark the position of the 4 spring clips (

) on the worktop,

as shown in the sketch.

•

Secure the clips using the 4 screws supplied (

•

Fit the hob into the worktop (see sketch).

B -

For worktops made of marble or other materials (laminated

synthetic materials, ceramics, natural stone) the appliance has to

be secured with special brackets, code number 4819 404 78697,

(to be requested from After-Sales Service).

•

Fit the hob into the worktop.

•

Secure the 4 fixing brackets (

) using screws (

) in

position (

) on the hob.

•

The position of the fixing brackets depends on the

thickness of the worktop.

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Whirlpool AKM 702/NB/02 Mode d'emploi Page 8