Whirlpool SC 350 Mode d'emploi

13Before carrying out any maintenanceoperation, disconnect the appliancefrom the power supply.Keep this handbook with care and if therefrigerator is s

22Check...- The electrical connections.- The position of the thermostat/s: must not be set to 0.- The electrical connections.- That the floor is level

23Electrical Connection1) For Great Britain onlyWarning - this appliance must be earthedFuse replacementIf the mains lead of this appliance is fitted

14Safeguarding the environmentInformation:This appliance does not contain CFCs (replacedwith R134a) or HFCs (replaced with R600aIsobutane). For more i

15Door reversibilityThe direction of door opening can be changed.How to proceed:Disconnect the appliance from thepower supply.Empty the appliance and

167. Unscrew the lower pin of the refrigeratordoor 8 (Fig.6), then fix it on the oppositeside, after removing the protection. Put theprotection in the

17Adjust front feet 1 and 2 (fig. 8) so that theappliance is slightly tilted backwards; in this waythe door will close properly.To avoid undesired sou

18Freezer compartment• Position the thermostat knob (fig.10) to 4.Leave the appliance to operate at this settingfor 24 hours.• Then adjust the setting

19 To measure the temperature in a specificzone (e.g. the rack) you can use a thermometerplaced, from the beginning, in a container full ofwater (glas

20The upper part of the freezer isdivided as follows (fig. 14):Q A compartment for freezing thin foodsquickly. It is ideal for freezing berries. After

21• Turn the refrigerator thermostat knob to “0”• Empty the freezer as described below:• Wrap frozen products in cool bags or inmultiple sheets of pap