Whirlpool ARG 598-K Mode d'emploi télécharger pdf (Page 11)

ELECTRICAL CONNECTION

Ensure that the voltage indicated on the appliance data plate

corresponds to the mains voltage.

If the plug and socket are not of the same type, have the socket

replaced by a qualified electrician.

Regulations require that the appliance is earthed. The

Manufacturer declines all liabilities for injury to persons or

damage to property resulting from failure to observe these

regulations.

1) For Great Britain only

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A

13amp fused plug, to change a fuse in this type of plug use an

A.S.T.A. approved fuse to BS 1362 type and proceed as follows:

Remove the fuse cover (

) and fuse (

Fit replacement 13A fuse into fuse cover.

Refit both into plug.

Important:

The fuse cover must be refitted when changing a fuse and if the

fuse cover is lost the plug must not be used until a correct

replacement is fitted.

Correct replacement are identified by the colour insert or the

colour embossed in words on the base of the plug.

Replacement fuse covers are available from your local electrical

store.

2) For the Republic of Ireland only

The information given in respect of Great Britain will frequently

apply, but a third type of plug and socket is also used, the

2-pin, side earth type.

3) Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet, please

contact Whirlpool Service for further instruction. Please do not

attempt to change plug yourself. This procedure needs to be

carried out by a qualified Whirlpool technician in compliance

with the manufactures instructions and current standard safety

regulations.

3gb33000a.fm5 Page 24 Monday, August 20, 2001 12:41 PM

1 2 ... 6 7 8 9 10 11

Pas de commentaire

Whirlpool ARG 598-K Mode d'emploi Page 11