Whirlpool AZB 6670 Mode d'emploi télécharger pdf

Machine operation

Additional information (including troubleshooting and service) can be found in the individual sections of the

Instructions For Use.

Sort laundry by:

Material thickness:

whenever the load is greater than the dryer can handle,

separate laundry according to weight (e.g. dry towels and thin underwear separately).

Type of material:

cotton (linen); synthetic textiles (easy care).

Dryness level:

cupboard dry, iron dry etc.

Do not tumble dry:

woollens, silk, nylon stockings, delicate embroidery, fabrics with

metallic decorations, bulky items such as sleeping bags or pillows.

Check that all fastenings are closed and that pockets are empty. Ensure that there are

no cigarette lighters in the wash. Turn laundry inside out.

Place laundry loosely in the drum to achieve even drying throughout. Then close the

door.

Select the required drying programme by turning the programme selector knob (for

information, refer to programme table).

Select the required option by pressing the corresponding button.

The indicator lamp above the relevant button lights up to confirm your selection.

A fast blinking LED indicates that an invalid selection has been made (incompatible

option). Press the button again to cancel the option.

Start the drying programme by pressing the

“Start (Pause)”

button.

The relevant indicator lamp lights up.

Changing programme selection:

if the selected programme is changed during

drying, the dryer stops. The

“Start (Pause)”

indicator lamp flashes.

To run the new programme, press the

“Start (Pause)”

button again.

Interrupting programme:

to interrupt a drying cycle, press the

“Start (Pause)”

button and open the door. Wait at least 5 minutes, to allow the laundry to cool down,

before unloading the dryer. For your safety, the drying cycle stops automatically if you

open the door. To restart the cycle after opening the door, press the

“Start (Pause)”

button again.

Warning:

never stop a tumble dryer before the end of the drying cycle, unless all

items are quickly removed and spread out so that the heat is dissipated.

The final part of a drying cycle occurs without heat (cool-down cycle) to ensure that

the items reach a lower temperature to avoid wrinkling.

End:

take the laundry out of the dryer. The drying process is complete and the anti-

crease phase has been reached (active).

Set the programme selector knob to “Off” (“

”).

Set the programme selector knob to “Off” (“

”).

Cleaning the lint filter:

open door, pull lint filter up and out of machine and open it. Brush lint using a soft brush or your

fingertips. Close lint filter and push firmly back into place (more detailed informations are given in the Instructions For Use).

Emptying the water container:

pull container out by the handle and empty. Replace the container when empty by pushing it

completely back into place.

Please note:

only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover

thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.

The Manufacturer is not liable for any damage to laundry resulting from inadequate or incorrect fabric care instructions which

have been provided with the garment or article.

Sort laundry according to

care symbols

Do not tumble dry

Suitable for tumble drying -

Suitable for tumble drying

at low temperatures

Prepare laundry

Load dryer

Select programme

Select options

(if available)

Start dryer

Programme end -

unload dryer

Switch dryer off

1 2 3 4 5 6

Résumé du contenu

Page 1 - Machine operation

1Machine operationAdditional information (including troubleshooting and service) can be found in the individual sections of the Instructions For Use.S

Page 2 - Special programmes

*Weight of average and maximum load.**Test programmes according to EN 61121, tested with maximum rated load capacity.2Overview of programmes OptionsAp

Page 3 - How to proceed if

3How to proceed if...you want to check the dryer yourself first: (If your machine is not functioning correctly, please check the following points b

Page 4 - Failure codes

4Failure codesIn the event that the dryer malfunctions, one of the following failure codes may be displayed. Depending on the model of your dryer, the

Page 5 - Quick Reference Guide

GBQuick Reference GuideBefore using the machine, please also read the Instructions For Use carefully!5AZB 6670Indicator lampsProgramme selector knobTh

Page 6 - 5019 307 01363

65019 307 01363(Subject to technical modifications)GentleSelecting this option will reduce the drying temperature. This option cannot be selected when