Whirlpool SMC 653 F/BT/IXL Guide de l'utilisateur Page 1

Naviguer en ligne ou télécharger Guide de l'utilisateur pour Plaques chauffantes Whirlpool SMC 653 F/BT/IXL. Whirlpool SMC 653 F/BT/IXL Setup and user guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
IT
Quick guide
PRODUCT DESCRIPTION
THANK YOU FOR PURCHASING A WHIRLPOOL
PRODUCT
To receive more comprehensive help and support,
please register your product at www.whirlpool.eu/
register
Before using the appliance carefully read the Health and
Safety guide.
USING THE APPLIANCE FOR THE FIRST TIME
SETTING THE POWER
At the time of purchase, the hob is set to the maximum possible power
(nL). The maximum power level (nL) is printed on the identication
plate on the bottom of the hob.
To set the power of the hob:
Once you have connected the device to the mains power supply, you
can set the power level within 60 seconds.
Press the
button for at least 3seconds.On the screen, the
symbol will be displayed.
Press the
button until the last power level selected appears.
Use the
and buttons to select the desired power level. The
power levels available are: 2.5 kW - 4.0 kW - 6.0 kW – nL (no limit).
Conrm by pressing
.
The power level selected will stay in the memory even if the power
supply is interrupted.
To change the power level, disconnect the appliance from the mains
for at least 60 seconds, then plug it back in and repeat the steps above.
If an error occurs during the setting sequence, the
symbol will
appear, and you will hear a beep. If this happens, repeat the operation.
If the error persists, contact the After-Sales Service.
TURNING THE BEEP ON/OFF
To activate/deactivate the beep:
Switch on the hob
Press the
button on the rst left-hand slide touchscreen for
3seconds.
Any alarms set will remain active.
Only use pots and pans made from ferromagnetic
material which are suitable for use with induction
hobs. To determine whether a pot is suitable, check
for the
symbol (usually stamped on the bottom).
A magnet may be used to check whether pots are
magnetic.
The quality of the pots and pans used may aect performance and
cooking results.
Empty pots or pots with a thin base
Do not use empty pots or pans when the hob is on. The hob is
equipped with an internal safety system that constantly monitors
the temperature, activating the "automatic o" function where high
temperatures are detected. When used with empty pots or pots with
thin bases, the temperature may rise very quickly, and the "automatic
o" function may not be triggered immediately, damaging the pan or
the hob surface. If this occurs, do not touch anything, and wait for all
components to cool down.
If any error messages appear, call the service centre.
Minimum diameter of pot/pan base for the dierent cooking areas
1. Identifying the cooking zone
2. Cooking zone o button
3. Cooking level selected
4. Indicator light - function active
5. Quick heat button
6. Special function indicators
7. On/ o button
8. Cooking time indicator
9. 6
th
Sense button (special functions)
10. OK/ Key lock button - 3 secs
11. Slide touchscreen
12. Vertical exible zone button
13. Timer
14. Timer indicator
POTS AND PANS
CONTROL PANEL
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - PRODUCT DESCRIPTION

ITQuick guidePRODUCT DESCRIPTIONTHANK YOU FOR PURCHASING A WHIRLPOOL PRODUCTTo receive more comprehensive help and support, please register your produ

Page 2 - COOKING TABLE

SWITCHING THE HOB ON/OFFTo turn the hob on, press the power button for around 1 second. To turn the hob o, press the same button again, and all cook

Page 3 - TROUBLESHOOTING

ITWARNING• Do not use steam cleaning equipment.• Before cleaning, make sure the cooking zones are switched o and that the residual heat indicator (

Page 4 - 400010911792

400010911792You can download the Safety Instructions, User Manual and product card, which includes the key energy data, in the following ways:• By vi

Commentaires sur ces manuels

Pas de commentaire