Whirlpool WMG 823B EU.M Mode d'emploi télécharger pdf (Page 4)

Care and maintenance

Cutting off the water and electricity

supplies

•Turnoffthewatertapaftereverywashcycle.

This will limit wear on the hydraulic system inside

the washing machine and help to prevent leaks.

•Unplugthewashingmachinewhencleaningit

and during all maintenance work.

Cleaning the washing machine

•  The outer parts and rubber components

of the appliance can be cleaned using a

soft cloth soaked in lukewarm soapy

water. Do not use solvents or abrasives.

•  The washing machine has a “Auto Clean”

programme for its internal parts that must be

run with no load in the drum.

To help the wash cycle you may want to use

either the detergent (i.e. a quantity 10% the

quantity specified for lightly-soiled garments) or

special additives to clean the washing machine.

We recommend running a cleaning programme

every 40 wash cycles.

To start the programme press buttons A and B

simultaneously for 5 seconds (see figure).

The programme will start automatically and will

run for about 70 minutes. To stop the cycle press

the START/PAUSE button.

Cleaning the detergent dispenser

drawer

Remove the dispenser

by raising it and pulling

it out (see figure).

Wash it under running

water; this operation

should be repeated

frequently.

Caring for the door and drum of

your appliance

•Alwaysleavetheportholedoorajarinorderto

prevent unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning

pump which does not require any maintenance.

Sometimes, small items (such as coins or buttons)

may fall into the pre-chamber which protects the

pump, situated in its bottom part.

! Make sure the wash cycle has finished and

unplug the appliance.

To access the pre-chamber:

1. using a screwdriver,

remove the cover panel

on the lower front

part of the washing

machine (see figure);

2. unscrew the lid

by rotating it anti-

clockwise (see figure):

a little water may trickle

out. This is perfectly

normal;

3. clean the inside thoroughly;

4. screw the lid back on;

5. reposition the panel, making sure the hooks

are securely in place before you push it onto the

appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If

there are any cracks, it should be replaced

immediately: during the wash cycles, water

pressure is very strong and a cracked hose could

easily split open.

! Never use second-hand hoses.

1 2 3 4 5 6 7 8 9 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Whirlpool WMG 823B EU.M Mode d'emploi Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à laver Whirlpool WMG 823B EU.M