Whirlpool AWM 363/3 Mode d'emploi télécharger pdf (Page 12)

TRANSIT BOLTS

The appliance is fitted with transit bolts to prevent

internal damage while it is being moved.

Before using the appliance the transit bolts MUST

be removed (Fig. 1).

Slacken the bolts with the spanner supplied (Fig. 2).

Unscrew the bolts by hand.

Hold each bolt head and pull the bolts complete

with red plastic spacer through the wide part of the

holes.

Close the holes with the provided plastic caps.

Fit the caps in the direction indicated by the arrow

in the large opening and slide them into the narrow

slot until they sit properly (Fig. 3).

Keep the transit bolts for future use.

Note

Fit the transit bolts before transporting the appliance as

follows:

Pry up the plastic caps with a screwdriver, slide

them out against the direction indicated with the

arrow and remove them.

Fit the transit bolts by following the above

procedure in reverse order.

INSTALLATION INSTRUCTIONS

Fig. 1

Fig. 2

Fig. 3

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Pas de commentaire

Whirlpool AWM 363/3 Mode d'emploi Page 12