Whirlpool ACG052XJ0 Guide de dépannage télécharger pdf (Page 10)

SET TEMP./

TIME

CLOCK

–

Starting your air conditioner

Operating your air conditioner properly helps you to obtain the best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

• If you turn the air conditioner off, wait at least 3 minutes before turning it back on. This prevents the air conditioner from

blowing a fuse or tripping a circuit breaker.

• Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C). The

inside evaporator coil will freeze up and the air conditioner will not operate properly.

Operating Your Air Conditioner

TIME

AUTO COOL TURBO

COOL HIGH

CHECK

FILTER

SET TEMP./

TIME

FAN ONLY LOW

OFF

TIME

CLOCK MODE FAN SPEED OFF

FILTER

RESET

SLEEP

TIMER

–

Press any control key to turn on the air conditioner.

TIMER

1. Press TIMER key to set the ON

TIME. The indicator light and

“--:--” will flash. Press the “+”or

“–” key to set the ON TIME.

2. Select MODE, FAN SPEED or SLEEP. If an OFF

Time is desired, go to step 3. If not, press the

TIMER key twice to accept the setting. The ON

TIME indicator light will stay on.

3. Press TIMER key a second to set the OFF TIME.

The ON TIME indicator light will stay on and the

OFF TIME indicator light and “--:--” will flash. Press

the “+” or “–” key to set the OFF TIME.

4. Press TIMER key a third time to accept settings.

The indicator light or lights stay on until each setting

is reached.

To cancel ON TIME and/or OFF TIME, press and hold

TIMER key for 3 seconds.

To review settings, press once to view ON TIME,

press a second time to view OFF TIME, and press a

third time to exit.

TIME

OFF

TIME

TIMER

CLOCK

If air conditioner is in the FAN ONLY mode or OFF:

• Press the CLOCK key to set the time. You will

see the colon flashing.

If air conditioner is in the AUTO COOL or COOL

mode:

• Press the CLOCK key one time to display the

time of day.

• Press the CLOCK key again to set the time. You

will see the colon flashing.

2. Press the “+”or “–” key to set the correct time.

After setting the time, press the CLOCK key

again to start the clock.

Optional: To display the clock in the 24-hour format,

press and hold CLOCK key for 3 seconds.

TEMPERATURE SELECTION

Press the “+” key to raise the

temperature. Each time you press or

hold the “+” key, the temperature will go

up 1° until it reaches 86°F. Press the

“–” key to lower the temperature. Each

time you press or hold the “–” key, the

temperature will go down 1° until it reaches 64°F. In

the OFF mode, to view current preset temperature

selection, press the “+” or “–”key.

Note: To change from “°F” to “°C” or from “°C” to

“°F”, press and hold the MODE key for 3 seconds.

MODE SELECTION

Press the MODE key until you see

the indicator light come on for the

setting you want. Choose AUTO

COOL, COOL, or FAN ONLY.

AUTO COOL - Cools room to a

preset temperature while it

automatically controls the fan

speeds.You can change the preset

temperature to one of your choice.

COOL - Cools the room to your preset

temperature.You can adjust the fan speed to

LOW, HIGH or TURBO.

FAN ONLY - Fan runs continuously to circulate

the air. No cooling takes place. You can adjust

the fan speed to LOW, HIGH or TURBO.

SET TEMP./

TIME

–

AUTO COOL

COOL

FAN ONLY

MODE

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

Commentaires sur ces manuels

Pas de commentaire

Whirlpool ACG052XJ0 Guide de dépannage Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Climatiseurs à système divisé Whirlpool ACG052XJ0