Whirlpool AKP 738 IX Mode d'emploi télécharger pdf (Page 9)

INSTRUCTIONS FOR OVEN USE

Fig. 6 Fig. 7

N.B.:

- Only use 25-40W/230V type E-14, T300°C incandescent lamps, or 20-40W/230 V type G9, T300°C halogen lamps (depending on model).

- The lamp used in the appliance is specically designed for electrical appliances and is not suitable for household room illumination

(Commission Regulation (EC) No 244/2009). - Lamps are available from our After-sales Service.

IMPORTANT:

- If using halogen lamps, do not handle with bare hands since ngerprints can damage them.

- Do not use the oven until the lamp cover has been repositioned.

REPLACING THE OVEN LAMP

To replace the rear lamp (if present):

1. Disconnect the oven from the power supply.

2. Unscrew the lamp cover (Fig. 6), replace the lamp (see note for lamp type) and screw the lamp cover back on (Fig. 7).

3. Reconnect the oven to the power supply.

FOR ELECTRICAL CONNECTION, SEE THE PARAGRAPH ON INSTALLATION

1. Control panel

2. Upper heating element/grill

3. Cooling system (if present)

4. Dataplate (not to be removed)

5. Light

6. Baking ventilation system (if present)

7. Turnspit (if present)

8. Lower heating element (not visible)

9. Door

10. Position of shelves

11. Rear wall

N.B.:

- Your product can appear slightly dierent from the drawing.

- At the end of cooking, after the oven has been switched o, the cooling fan may continue to run for a while.

EN9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Whirlpool AKP 738 IX Mode d'emploi Page 9