Whirlpool ACM 446 IX Mode d'emploi

4INSTRUCTIONS FOR USEINSTALLATION INSTRUCTIONSBEFORE USING THE APPLIANCEPRECAUTIONS AND GENERAL ADVICEENERGY SAVING TIPSOVEN ACCESSORIESCARE AND MAINT

13CARE AND MAINTENANCEDisconnect the appliance from the electrical power supply before carrying out any cleaning operation.• Clean using a cloth moist

14Removing the oven door:It should not be necessary to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. The

15TROUBLESHOOTING GUIDE1. The appliance does not work• Check the mains power supply and that the appliance is electrically connected.• Switch the appl

5INSTALLATION INSTRUCTIONSThis appliance is in Class 1.The appliance must be used with the gas specified on the rating plate located on the inside of

6Gas connectionFor information regarding gas connection instructions, see the section on “standards” relevant to your country (see attached leaflet “R

7The rubber hose must be connected as shown in fig. 2 and 3, in compliance with local applicable regulationsNatural gasUse outlet connector GN for nat

8Room ventilationGas appliancesThis appliance is not connected to a fume exhaust device. Therefore it must be installed and connected in compliance wi

9Electrical connectionBefore connecting the appliance, make sure that:1. the house electrical power supply nominal voltage matches that of the applian

10BEFORE USING THE APPLIANCE• Remove the accessories from the oven and heat it at 200°C for about two hours to eliminate the smell of protective greas

11• Keep children away from:- the controls and the appliance in general, especially during and immediately after use: risk of injury;- packaging (bags

12OVEN ACCESSORIES The accessories supplied depend on the model. The accessories supplied with the oven are listed in the separate Product Sheet (at t