Whirlpool TGZ 5758/IXL Mode d'emploi télécharger pdf

RUCZ

BUILT-IN GAS HOB INSTRUCTIONS

YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT

This manual and the appliance itself provide important safety messages, to be read and observed at all times.

All Safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

- The appliance must be disconnected from the power supply before carrying out any installation work.

- Installation and maintenance must be carried out by a qualified technician, in compliance with the manufacturer’s

instructions and local safety regulations. Do not repair or replace any part of the appliance unless specifically stated in the

user manual.

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this appliance.

The electrical and gas connections must comply with local regulations.

- When the hob is installed, provide a multi-pole circuit breaker with a contact separation of

at least 3 mm, that provides full disconnection.

- Regulations require that the appliance is grounded.

- The power cable must be long enough for connecting the appliance, once fitted in its

housing, to the power supply

- Use only flexible or rigid metal hose for gas connection.

- If necessary, the electrical power cable must be replaced exclusively with a power cable

having identical characteristics to the original supplied by manufacturer. This operation

must be performed by a qualified electrician.

- The manufacturer cannot be held responsible for any injury to persons or animals or

damage to property arising from failure to comply with these requirements.

- Do not use multiple plug adapters or extension cords.

- Do not pull the power cable to disconnect it from the electrical supply.

- The electrical components must not be accessible to the user after installation.

- Do not touch the appliance with any wet part of the body and do not operate it when

barefoot.

IMPORTANT SAFETY INSTRUCTIONS

This is the safety alert symbol, pertaining to safety, which alerts users to potential hazards to themselves and others.

All safety messages will follow the safety alert symbol and either the terms:

DANGER

Indicates a hazardous situation which, if not avoided, will cause serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could cause serious injury.

WARNING

If the information in this manual is not followed exactly, a fire or explosion may result

causing property damage or injury.

What to do if you smell gas:

- Do not try to light any appliance.

- Do not touch any electrical switch.

- Do not use any phone in your building.

- Immediately call your gas supplier from a neighbour’s phone. Follow the gas supplier’s instructions.

- If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or the gas supplier.

- Use appliance in well ventilated rooms only.

1 2 3 4 5 6 7 8 9

Résumé du contenu

Page 1

RUCZBUILT-IN GAS HOB INSTRUCTIONSENYOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANTThis manual and the appliance itself provide important safet

Page 2

- This hob (class 3) is designed solely for private household use for cooking food. Do not use this appliance as a space heater to heat or warm the ro

Page 3 - WARNING

After unpacking the hob, make sure that it has not been damaged during transport. In the event of problems, contact the dealer or your nearest After-s

Page 4

21BELECTRICAL CONNECTIONIMPORTANT: the data relevant to the voltage and power absorption are indicated on the rating plate.ASSEMBLYUse protective glov

Page 5 - AFTER-SALES SERVICE

FHG+-It is best to change the injectors before starting installation. Steps for injector exchange are:1. Remove the grids and burner/rings/caps and kn

Page 6 - CLEANING THE HOB PARTS

TROUBLESHOOTING GUIDEIf the hob will not operate correctly, before calling the After-Sales Service, refer to the Troubleshooting Guide to determine th

Page 7 - SAFEGUARDING THE ENVIRONMENT

• This hob has been designed, constructed and marketed in compliance with:- safety requirements of “Gas” Directive 2009/142/EC (ex: EEC 90/396);- safe

Page 8 - Burner Pot Ø

PRATICAL ADVICE FOR USING THE BURNERSIMPORTANT: WHEN THE HOB IS IN USE, THE ENTIRE HOB AREA MAY BECOME HOT.• To ignite one of the burners, turn the re

Page 9

CLEANING THE HOB PARTS (Appendix A) – See drawing below for parts removal guides.To reinstall the parts (grids, caps, rings and burners) reverse depic