Whirlpool SX 898 C 0 X Mode d'emploi télécharger pdf (Page 7)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Start-up and use

WARNING! The oven is provided

with a stop system to extract the

racks and prevent them from

comingoutoftheoven(1).

As shown in the drawing, to extract

them completely, simply lift the

racks, holding them on the front

part,andpull(2).

!Thersttimeyouuseyourappliance,heattheemptyovenwithitsdoor

closed at its maximum temperature for at least half an hour. Make sure that

the room is well ventilated before switching the oven off and opening the

oven door. The appliance may emit a slightly unpleasant odour caused by

protective substances used during the manufacturing process burning away.

! To make the setting process easier, keep the knob in position: this will

increase the scrolling speed of the numbers on the display.

! Each setting will automatically be stored in the appliance memory after 10

seconds.

! The touch controls cannot be activated if the user is wearing gloves.

! In order to optimise the cooking performance, when starting the selected

function, product settings will be applied that could cause a delayed start of

the fan and heating elements.

Control panel lock

! The control panel can be locked while the oven is off, once cooking has

startedornishedandduringprogramming.

To lock the oven controls, press and hold the

icon for at least 2 seconds.

A buzzer sounds and the display shows the key symbol “n—O”. The

icon will light up to indicate lock activation.

To deactivate the lock, press and hold the

icon again for at least 2

seconds.

Setting the clock

! The clock can only be set when the oven is switched off. If the oven is

in standby mode, pressing the

icon once will display the current time

setting. Press it again to set the time.

After connection to the power supply network or after a blackout, the

iconandthedigitsontheTIMEdisplaywillashfor10seconds.

To set the clock:

1. Press the

icon.

2. Turn the TIMER knob towards “ ” and “ ”toadjustthehourvalue.

3. Once you have reached the correct hour value, press the

icon.

4. Repeat the above process to set the minutes.

If a blackout occurs, it will be necessary to reset the clock. If the

icon

ashesonthedisplay,thisindicatesthattheclockhasnotbeensetcorrectly.

Setting the minute minder

! The minute minder may be set regardless of whether the oven is switched

on or off. It does not switch the oven on or off.

When the set time has elapsed, the timer emits a buzzer that will automatically

stop after 30 seconds or when any active button on the control panel is

pressed.

Toadjustthetimerproceedasfollows:

1. Press icon

2. Turn the TIMER knob towards “

” and “ ”toadjustthehourvalue.

3. Once you have reached the desired value, press the

icon again.

The lit

symbolwillremindyouthattheminuteminderison.TheDISPLAY

will show the countdown.

To cancel the minute minder, press the

icon and use the knob to set the

time to 00:00. Press icon

again.

The

icon will switch off to indicate that the minute minder has been

disabled.

Starting the oven

1. Switch the control panel on by pressing the icon. The appliance buzzer

soundsthreetimes(ascending)andallbuttonslightupinsequence.

2. Select the desired cooking mode by turning the SELECTOR knob. The

display shows:

- the temperature associated with the mode, if programming manually;

- “Auto” and the duration alternately, if programming is automatic.

3. Press the

icon to begin cooking.

4. The oven will begin its preheating phase, the preheating indicators will light

up as the temperature rises.

5.Whenthepreheatingprocesshasnished,abuzzersoundsandallthe

preheating indicator lights show that this stage has been completed: the food

can then be placed in the oven.

6.Duringcookingitisalwayspossibleto:

- modify the temperature by turning the THERMOSTAT

 knob (manual

modesonly);

-setthedurationofacookingmode(seeCookingModes);

- press the

icon to stop cooking. In this case the appliance stores the

temperaturemodiedpreviouslyinitsmemory(manualmodesonly);

- switch off the oven by pressing the

icon for 3 seconds.

7. If a blackout occurs while the oven is already in operation, an automatic

system within the appliance will reactivate the cooking mode from the point at

which it was interrupted, provided that the temperature has not dropped below

a certain level. Programmed cooking modes which have not yet started will

notberestoredandmustbereprogrammed(forexample:acookingmode

has been programmed to start at 20:30. At 19:30 a blackout occurs. When the

powersupplyisrestored,themodewillhavetobereprogrammed).

! There is no preheating stage for the GRILL mode.

!Neverputobjectsdirectlyonthebottomoftheoven;thiswillpreventthe

enamel coating from being damaged.

!Alwaysplacecookwareontherack(s)provided.

! The oven will begin its preheating phase after 2 seconds from selecting

the desired cycle.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan

blows a stream of air between the control panel and the oven door, as well

as towards the bottom of the oven door.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Whirlpool SX 898 C 0 X Mode d'emploi Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Whirlpool SX 898 C 0 X