Whirlpool PCTTC141160F Mode d'emploi télécharger pdf (Page 3)

INSTALLATION

Assembly

A) If the worktop is made of wood, use the appropriate

brackets, spring clips and screws provided.

• Position the 4 clips (A) around the cooktop frame, in the

slots provided, see Fig. 1

• Measure the centre of the vertical sides of the cut out a

shown in Fig. 2.

• Position the centre of the brackets (C) on the centre of the

side previously identified.

• The upper edge of the brackets must be flush with the

worktop surface.

• Secure using the 4 screws (B) provided that should

screwed into the pre-prepared holes.

• Insert the cook hob into the pre-prepared hole ensuring

that the clips (A) lodge into the bracket slots provided

(C Fig. 4 e 5).

B) If the worktop is made of marble or other materials

(plastic compounds, ceramics, stone, etc.), the hob must

be fitted by means of brackets code 4819 310 18528.

(to be ordered from After-Sales Service if not provided).

• Fit the hob into the worktop.

• Position the brackets (C) as shown in the figure, in

accordance with the thickness of the worktop.

• Secure the screws (E) in holes (D).

Fig. 2

Fig. 1

Fig. 3

Fig. 4

Fig. 5

Top min. 20 mm

Top max. 50 mm

1 2 3 4 5 6 7

Pas de commentaire

Whirlpool PCTTC141160F Mode d'emploi Page 3