Whirlpool OSHS89EDP(MI) Mode d'emploi Page 19

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 24
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 18
GB
19
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
! If the oven is too hot, the pyrolytic cycle may not start.
Wait for the oven to cool down.
! The programme may only be started once the oven door
has been closed.
!ThedesiredFastCleanmodewillbeconrmedandstarted
automatically if the CLOCK icon button is not pressed within
10 seconds from selecting the cooking time.
ToactivatetheFastCleanprogramme:
1. Switch the control panel on by pressing the button.
2. Press button ;thedisplaywillshowthetext“Piro”,
“nor” and the default duration of 1:30 h (normal cycle)
alternately.
3. Press button ,thenturntheTIMERknobtoadjustthe
default cleaning level. There are 3 different levels to choose
from,eachwithapre-setdurationwhichcannotbemodied:
1. Economy (ECO): turn the knob towards “-”.Duration1
hour.
2. Normal (NOR): initial level. Duration 1 hour and 30
minutes.
3. Intensive (INT): turn the knob towards “+”.Duration 2
hours.
4. Press the buttontoconrm.
5. Press the button to begin the cleaning cycle.
AnendtimefortheFASTCLEANcycle(asforanormal
cooking cycle) may be programmed (see Programming the
automatic cleaning end time).
Safety devices
• thedoorlocksautomaticallyassoonasthetemperature
reaches a high value; the icon lights up on the
display;
• pressingthe button cancels the cleaning cycle at
anytime;
• if a malfunction occurs, the heating elements will be
switchedoff;
• oncetheovendoorhasbeenlocked,youcannotchange
the duration and end time settings.
Programming the automatic cleaning end time
1. Press the button twice: the icon and the
numericaldigitsonthedisplaywillbegintoash.
2. Turn the TIMER knob towards “+”and-”toadjustthe
cleaning end time value.
3. Once you have reached the desired end time, press the
button again. The display will show the duration, the
cleaning end time and the set cleaning level alternately.
4. Press the button to activate the programmed mode.
Vue de la page 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire