Whirlpool AKM 486/IX Mode d'emploi télécharger pdf (Page 2)

18

DESCRIPTION OF PRODUCT AND SYMBOLS

1.

Removable panstand grids

2.

Auxiliary burner

3.

Semi-rapid burner

4.

4 ring burner

5.

Semi-rapid burner

6.

Auxiliary burner

7.

Auxiliary burner control knob

8.

Semi-rapid burner control knob

9.

4-crown burner control knob

10.

Semi-rapid burner control knob

11.

Auxiliary burner control knob

Symbols

tap closed

Maximum flame

Minimum flame

LIGHTING THE BURNERS

1.

Turn the corresponding knob anticlockwise to

the max. flame symbol.

2.

Press the knob against the control panel to

ignite the burner.

3.

After the burner has ignited, keep the knob

pressed for about 5 seconds to allow the

thermocouple to warm up.

This safety device shuts off the gas if the flame

goes out accidentally (draughts, interruption of

gas, liquids boiling over, etc.).

The device must not be pressed for more than

15 sec. If, after that time has elapsed, the

burner does not remain lit, wait at least one

minute before trying to light it again.

The burner might go out when the knob is

released. This means that the thermocouple

has not warmed up enough. In this case,

repeat the operations described above.

2 6

11 10 9 8 7

3 1 4 5

1 2 3 4 5 6 7 ... 12 13

Commentaires sur ces manuels

Pas de commentaire