Whirlpool ACM927 WH Mode d'emploi télécharger pdf (Page 11)

Removing the door

Caution: When carrying out the following operations it is

advisable to wear protective gloves. Carefully follow these

instructions to prevent injury and/or damage to the oven

door and hinges.

Pay attention to the oven door hinges: risk of injuring

hands!

Open the oven door

Fully open the saddle brackets

While opening the saddle brackets, use a metal tool such as

handle side of a spoon for easy opening.

Close the door almost completely (Fig. 2), and remove by pulling

it outwards.

NOTE:

Proceed in reverse order to refit the door. Make sure the

saddle brackets are lowered before closing the oven door.

Replacing the rear oven lamp:

Disconnect the oven from the power supply.

After the oven has cooled down, unscrew (anticlockwise) the

lamp cover

(Fig. 3).

Replace the lamp (see note).

Refit the lamp cover.

Reconnect the oven to the power supply.

Note: Only use 25 W/230 V E-14 type T300°C lamps

available from the After-Sales Service.

Important: Do not use the oven until the lamp cover has

been refitted.

Fig. 1

Fig. 2

saddle

bracket

(see detail A)

saddle

bracket

DETAIL A

Fig. 3

1 2 ... 6 7 8 9 10 11 12

Pas de commentaire

Whirlpool ACM927 WH Mode d'emploi Page 11