Whirlpool ACM 435/IX/F/G Mode d'emploi télécharger pdf (Page 10)

FIXING TO THE SUPPORT STRUCTURE -

FLUSH-MOUNTING MODEL

Important: The following operation must be carried out by a competent technician. Installation

can be carried out on different materials such as masonry, metal, solid wood and plastic

laminated wood provided it is heat resistant (T 90°C).

Make an opening in the cabinet top, of the dimensions shown in fig. 1; to correctly install the hob a 2 mm

deep milling must also be made in the top.

Note: In case of laminated tops less than 2 mm thick, carry out

the milling in the cabinet as shown in the diagram (detail).

Before positioning the hob, apply the adhesive sealing strip

(supplied) on the entire bottom surface that will be in contact

with the top (fig. 2).

Carry out these operations:

• Place the hob on the milling and, using the screws and brackets

supplied, fix it to the support structure, ensuring that it is

perfectly flat (fig. 3).

• Carefully trim the excess sealing strip. In case of installation on

wood (especially chipboard), if there are small spaces

between the milling and the edge of the hob, fill with minimum

amounts of silicone. The bottom part of the casing must be

entirely accessible after installation.

Important:

• Tighten (lightly by hand) the brackets fixing the hob to the

cabinet.

• If the cabinet worktop is in wood or similar, protect the edge

of the milling with a primer before closing with the sealing strip.

Fix the hob with the special brackets supplied.

The supply includes 2 types of brackets:

- 8 of standard length for installation on kitchen tops thicker than

4 cm

- 8 longer than standard for installation on kitchen tops less than

4 cm thick

The brackets must be fixed with the special screws to the front (4)

and the back (4) using the seats on the bottom of the hob (Fig. 3).

Important: The power cable must be long enough to allow the

hob to be removed upwards.

1200

400

1201

1188

401

388

R10

- 0

- 1

Sez. “A”

6.5

- 0

Fig. 1

Fig. 2

Fig. 3

1 2 ... 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire

Whirlpool ACM 435/IX/F/G Mode d'emploi Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Whirlpool ACM 435/IX/F/G