Whirlpool WHE 20112 Mode d'emploi

Naviguer en ligne ou télécharger Mode d'emploi pour Réfrigérateurs-congélateurs Whirlpool WHE 20112. Whirlpool WH2111 Instruction for Use [es] [fr] [it] [tr] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
INSTRUCTIONS FOR USE
1
GB
A. Lid Handle.
B. Lock (if provided).
C. Seal.
D. Defrost water drain plug (depending on model).
E. Control panel.
F. Basket (depending on model).
G. Condenser (located at the rear).
INSTALLATION
Refer to chapter “Before using the appliance”.
Unpack the appliance.
Remove the 4 protection pieces inserted between
lid and appliance.
Warning: two of the four protection pieces must be
fitted in the seat of the condenser plastic supports,
located at the rear of the product.
This is necessary to ensure the correct distance from the
wall.
Clean the inside of the appliance before using it.
Ensure that the defrosting water drainage plug (if provided)
is correctly positioned (D).
For best operation of the appliance and in order to avoid
damage when the lid is opened, leave a space of at least
7 cm from the rear wall and 7 cm at the sides.
Fit the accessories (if provided).
1
2
3
4
1. Red LED: when flashing, it indicates that an alarm
condition is present (see “TROUBLESHOOTING
GUIDE”)
2. Blue LED: the function “6th Sense” is automatically
activated and does not need to be selected by the user,
therefore the blue LED (2) “Sense” always remains
on. For more technical details, refer to paragraph
“6th Sense function”.
3. Green LEDs: they indicate that the appliance is in
operation, and the temperature has been set.
4. Temperature setting button: to adjust the set
temperature and to activate/deactivate the fast freezing
operations.
Switching on the appliance
Plug in the appliance.
The green LED lights up (“Normal”).
The blue LED lights up (“Sense”).
The red LED flashes to indicate that the temperature
inside the appliance is not yet sufficiently low for food
storage. The red LED will normally switch off within the
first six hours after the appliance is switched on.
Place food inside the product only when the red LED has
switched off.
Note:
As the seal is tight, the appliance lid cannot be reopened
immediately after closing. Wait a few minutes before
re-opening the lid of the appliance.
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE1GBA. Lid Handle.B. Lock (if provided).C. Seal.D. Defrost water drain plug (depending on model).E. Control panel.F. Basket (depen

Page 2

2Temperature adjustment Use the key (4) to select the desired temperature. To adjust the internal temperature, proceed as follows:• Repeatedly press

Page 3 - MONTHS FOOD

3FOOD STORAGERefer to the table on the appliance. Classification of frozen foods Put the frozen products into the appliance and classify them; The sto

Page 4

44. All LEDs are off and the product is not working.• Is there a power failure?• Is the plug properly inserted in the socket?• Is the electric cabl

Commentaires sur ces manuels

Pas de commentaire