Whirlpool FSCR90420 Guide d'utilisation et d'entretien télécharger pdf (Page 38)

WARNING

Switch o and unplug the washing machine before

cleaning the water lter or draining residual water.

If you used a hot wash programme, wait until the

water has cooled down before draining any water.

Clean the water lter regularly, to avoid that

the water cannot drain after the wash due to

obstruction of the lter.

If the water cannot drain, the display indicates that

the water lter may be clogged.

Place a broad, at container beneath the water

lter, to collect the drain water.

3. Drain the water:

If your washing machine model has an emergency

drain hose:

Remove the stopper at the end of the hose and

let the water ow into the container. When the

container is full with water, plug the stopper to

the hose end and empty the container. Repeat

this procedure until no more water ows out.

Afterwards rmly close the emergency drain hose

with the stopper and reinsert the hose in the

washing machine’s base.

CLEANING THE WATER FILTER / DRAINING

RESIDUAL WATER

1. Remove the plinth: Push the tabs left and right

to release the plinth and remove it.

2. Container for drain water:

If your washing machine model has an emergency

drain hose:

Provide a at container for the drain water. Remove

the emergency drain hose from the base of the

washing machine.

If your washing machine model has no emergency

drain hose:

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 53 54

Pas de commentaire

Whirlpool FSCR90420 Guide d'utilisation et d'entretien Page 38