Whirlpool FRESH CARE 7010 Mode d'emploi télécharger pdf (Page 13)

User manual

CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE

1. Close water tap and unscrew the inlet hose.

Clean the mesh lter at the hose’s end carefully with a

ne brush.

3. Now unscrew the inlet hose on the back of the washing

machine by hand. Pull out the mesh lter from the valve

on the back of the washing machine with pliers and

carefully clean it.

4. Insert the mesh lter again. Connect the inlet hose to

water tap and washing machine again. Do not use a tool

to connect the inlet hose. Open the water tap and check

that all connections are tight.

CLEANING THE DETERGENT DISPENSER

1. Remove the detergent dispenser by pressing on the

release button and at the same time pulling out the

detergent dispenser.

Remove the insert from the softener compartment.

3. Clean all parts under running water, removing all

detergent or softener residues.

Wipe the parts dry with a soft cloth.

5. Reinstall the detergent dispenser and push it back into

the detergent compartment.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Pas de commentaire

Whirlpool FRESH CARE 7010 Mode d'emploi Page 13