Whirlpool AWG 912 S/PRO Guide d'utilisation et d'entretien télécharger pdf (Page 37)

If your washing machine model has no emergency

drain hose:

Slowly turn the lter counterclockwise until water

ows out. Let the water ow out, without removing

the lter.

When the container is full, close the water lter by

turning it in clockwise. Empty the container. Repeat

this procedure until all the water has drained.

4. Remove lter: Lay a cotton cloth beneath the

water lter, which can absorb a small amount of

rest water. Then remove the water lter by turning

it out anticlockwise.

5. Clean the water lter: remove residues in the

lter and clean it under running water.

6. Insert the water lter and reinstall the plinth:

Reinsert the water lter again by turning it in

clockwise direction. Make sure to turn it in as far

as it goes; the lter handle must be in vertical

position. To test water tightness of the water

lter, you can pour about 1 liter of water into the

detergent dispenser.

Then reinstall the plinth.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 53 54

Pas de commentaire

Whirlpool AWG 912 S/PRO Guide d'utilisation et d'entretien Page 37