Whirlpool AKS 2450 IX Mode d'emploi télécharger pdf (Page 4)

GB2

- During and after use, do not touch the heating elements or interior surfaces of the

appliance - risk of burns. Do not allow the appliance to come into contact with cloths

or other flammable materials until all the components have cooled sufficiently.

- At the end of cooking, exercise caution when opening the appliance door, letting the

hot air or steam exit gradually before accessing the oven. When the appliance door is

shut, hot air is vented from the aperture above the control panel. Do not obstruct the

vent apertures.

- Use oven gloves to remove pans and accessories, taking care not to touch the heating

elements.

- Do not place flammable materials in or near the appliance: a fire may break out if the

appliance is inadvertently switched on.

- Do not heat or cook sealed jars or containers in the appliance. The pressure that builds

up inside might cause the jar to explode, damaging the appliance.

- Do not use containers made of synthetic materials.

- Overheated oils and fats catch fire easily. Always remain vigilant when cooking foods

rich in fat and oil.

- Never leave the appliance unattended during food drying.

- If alcoholic beverages are used when cooking foods (e.g. rum, cognac, wine),

remember that alcohol evaporates at high temperatures. As a result, there is a risk that

vapours released by the alcohol may catch fire upon coming into contact with the

electrical heating element.

- Never use steam cleaning equipment.

- Do not touch the oven during the pyrolysis cycle. Keep children away from the oven

during the pyrolysis cycle (only for ovens with Pyrolysis function).

- Only use the temperature probe recommended for this oven.

- Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass

since they can scratch the surface, which may result in shattering of the glass.

- Ensure that the appliance is switched off before replacing the lamp to avoid the

possibility of electric shock.

Scrapping of household appliances

- This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal

regulations. Before scrapping, cut off the power supply cable.

- For further information on the treatment, recovery and recycling of household electrical appliances, contact your

competent local authority, the collection service for household waste or the store where you purchased the appliance.

After unpacking the oven, make sure that it has not been damaged during transport and that the oven door closes properly. In

the event of problems, contact the dealer or your nearest After-sales Service. To prevent any damage, only remove the oven

from its polystyrene foam base at the time of installation.

PREPARING THE HOUSING UNIT

• Kitchen units in contact with the oven must be heat resistant (min 90°C).

• Carry out all cabinet cutting work before fitting the oven in the housing and carefully remove all wood chips and sawdust.

• After installation, the bottom of the oven must no longer be accessible.

• For correct appliance operation, do not obstruct the minimum gap between the worktop and the upper edge of the oven.

ELECTRICAL CONNECTION

Make sure the power voltage specified on the appliance dataplate is the same as the mains voltage. The dataplate is on the front

edge of the oven (visible when the door is open).

• Power cable replacement (type H05 RR-F 3 x 1.5 mm

) must be carried out by a qualified electrician. Contact an

authorized service centre.

INSTALLATION

1 2 3 4 5 6 7 8 9 ... 17 18

Commentaires sur ces manuels

Pas de commentaire

Whirlpool AKS 2450 IX Mode d'emploi Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Fours Whirlpool AKS 2450 IX