Whirlpool NMTP 1912 FW (TK)/HA Mode d'emploi télécharger pdf (Page 14)

! Before operating your new appliance please read

these instructions carefully. They contain important

information for safe use, installation and care of the

appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of the

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free

room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation

to operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part

of the appliance and any furniture above it, and at

least 5 cm between the sides and any furniture/side

walls.

4. Ensure the appliance is away from any sources of heat

(direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers

supplied in the installation kit, following the

instructions provided.

Levelling

1. Install the appliance on a level and sturdy floor.

2. If the floor is not perfectly horizontal, adjust the

refrigerator by tightening or loosening the front feet.

Installation

Electrical connections

After transportation of the appliance, carefully place it

in an upright position and wait at least 3 hours before

connecting it to the electricity mains. Before inserting

the plug into the electrical socket ensure the following:

 The appliance is earthed and the plug is compliant

with the law.

 The socket can withstand the maximum power of the

appliance (this is indicated on the data plate in the

bottom left section of the refrigerator compartment),

for example 150 W).

 The voltage is in the range of values indicated on

the data plate located on the bottom left section

(e.g. 220-240V).

 The socket is compatible with the plug of the

appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it (see Assistance).

Do not use extension cords or multiple sockets.

! Once the appliance has been installed, the power

supply cable and the electrical socket must be easily

accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced

by authorised technicians only (see Assistance).

! The manufacturer declines any liability should

these safety measures not be observed.

Reversible doors

If it is necessary to change the direction in which the

doors open, please contact the Technical Assistance

Centre.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Whirlpool NMTP 1912 FW (TK)/HA Mode d'emploi Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs-congélateurs Whirlpool NMTP 1912 FW (TK)/HA