Whirlpool ED20ZK Manuel d'utilisateur télécharger pdf (Page 14)

USING YOUR REFRIGERATOR

Removing the ice maker storage bin

(ED22ZR only)

Remove, empty and clean the storage bin if;

• the ice dispenser has not, or will not, be

used for a week or more.

• a power failure causes ice in the bin to

melt and freeze together.

• the ice dispenser is not used regularly.

To remove ice bin:

1. Pull the covering panel out from the

bottom and slide it to the rear.

2. Lift the signal arm so it clicks into the OFF

(up) position. Ice can still be dispensed,

but no more can be made.

Lift the front of the storage bin and pull it

out.

Empty the ice bin. Use hot or warm water

to melt the ice if necessary. Never use

anything sharp to break up ice in the

bin. This can damage the bin and dis

penser mechanism.

Wash with mild detergent. Rinse well. Do

not use harsh or abrasive cleaners or

solvents.

When replacing the bin, make sure it is

pushed in all the way. Then push the

signal arm down to the ON position to

restart ice production.

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Commentaires sur ces manuels

Pas de commentaire