Whirlpool E IB 15050 A1 D.UK.1 Guide de l'utilisateur

Naviguer en ligne ou télécharger Guide de l'utilisateur pour Congélateurs Whirlpool E IB 15050 A1 D.UK.1. Whirlpool E IB 15050 A1 D.UK Setup and user guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
EN
Quick guide
THANK YOU FOR BUYING AN INDESIT PRODUCT
In order to receive a more complete assistance, please
register your product on www . indesit . com/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
CONTROL PANEL
1. LED Light
2. On/Stand-by
3. Freezer and refrigerator compartment
temperature button
2.
1.
3.
ON/STANDBY
Press the button for 3 seconds to turn the appliance o. In
Stand-by mode the light in the refrigerator compartment does not turn
on. Press the button again briey to reactivate the appliance.
Note: this does not disconnect the appliance from the power supply.
FREEZER AND REFRIGERATOR
COMPARTMENT TEMPERATURE
The three LED indicators indicate the refrigerator compartment set
temperature.
It is possible to set a dierent temperature of the appliance with the
button.
The following adjustments are possible:
LEDs lit Set temperature
High (less cold)
Medium-high
Medium
Medium-low
Low (colder)
FAN*
You can turn the Fan on/o by pressing the button on the base (as
shown in the gure). If the ambient temperature exceeds
27°C, or if drops of water are present on the glass shelves,
it is essential that the fan is on to ensure the proper
preservation of the food. Deactivation of the fan allows
energy consumption to be optimised.
FREEZING FRESH FOOD
Place the fresh food to be frozen in the FREEZING ZONE in the freezer
compartment avoiding the direct contact with the food that is already
frozen. To optimize the freezing speed, the lower drawer can be
removed and the food can be placed directly on the bottom of the
compartment.
* Available only on certain models
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - PRODUCT DESCRIPTION

ENQuick guideTHANK YOU FOR BUYING AN INDESIT PRODUCTIn order to receive a more complete assistance, please register your product on www . indesit . co

Page 2 - STOP FROST SYSTEM*

* Available only on certain modelsSTOP FROST SYSTEM*The STOP FROST SYSTEM facilitates the defrost procedure for the freezer compartment. The STOP FROS

Page 3 - TROUBLESHOOTING

400011220265You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:• Visiting our website docs . indesit . eu• Usin

Commentaires sur ces manuels

Pas de commentaire